Hallo zusammen,
folgend mehr Futter. In diesem Startfall war allerdings der Server online damit ich per ssh hat den CPC zugreifen konnte (ich blicke aber nicht so ganz durch den ganzen Timestamp Switch durch. Folgend das massage Log aus dem ich aber nicht wirklich schlau werde, außer das reichlich Probleme protokolliert sind. Ein Insider kann hier vielleicht schon direkt etwas verdächtiges erkennen. Die Zeiteinstellung auf Server und CPC kann um einige Minuten abweichen (muss ich morgen mal prüfen und ggf auf CPC im Bios oder Server anpassen) und wenn ich mal Tagsüber Zeit habe mit dem Meyton Support Kontakt aufnehmen. Ja, die Anlage läuft top, aber mich beruhigt es immer wenn ich weiß weshalb was lange dauert und ob alles wie gewünscht im Hintergrund läuft
Apr 2 20:43:20 (none) syslog.info syslogd started: BusyBox v1.18.5
Apr 2 20:43:20 (none) daemon.info init: starting pid 139, tty '/dev/console': '/bin/sh //usr/local/bin/setnetpara.sh'
Apr 2 20:43:20 (none) daemon.info init: starting pid 179, tty '/dev/console': '/bin/sh /flash/meyton/start1.sh'
Apr 2 20:43:21 (none) auth.info sshd[106]: Received signal 15; terminating.
Apr 2 20:43:21 (none) auth.info sshd[228]: Server listening on 0.0.0.0 port 22.
Apr 2 20:43:21 (none) daemon.info init: starting pid 229, tty '/dev/console': '/usr/local/bin/startfbmode'
Apr 2 20:43:21 (none) user.info startfbmode: /flash/meyton/fb.mod is /etc/fb.modes
Apr 2 20:43:21 (none) daemon.info init: starting pid 240, tty '/dev/console': '/usr/local/bin/fbmoded'
Apr 2 20:43:21 (none) user.info fbmoded: FBModeD of Meyton Elektronik GmbH (C) 2011 Version 1.0.0a starting
Apr 2 20:43:21 (none) daemon.info init: starting pid 242, tty '/dev/console': '/bin/sh /usr/local/bin/startupscreen.sh'
Apr 2 20:43:21 (none) user.info fbmoded: makeClientDaemon: 0 with priority: 0
Apr 2 20:43:21 (none) user.info fbmoded: MEIdentitySrv::process: identity server is now running! IF: eth0
Apr 2 20:43:25 (none) auth.info sshd[256]: Accepted none for root from 192.168.10.200 port 49750 ssh2
Apr 2 20:43:35 (none) daemon.info init: starting pid 275, tty '/dev/console': '/bin/sh /flash/meyton/start2.sh'
Apr 2 22:43:36 (none) user.info mc5timed: is a real time process with highest priority (99) and locked memory!
Apr 2 22:43:36 (none) user.info mc5timed: makeClientDaemon: 1 with priority: 99
Apr 2 22:43:36 (none) user.info mc5timed: Version 1.5.0b started!
Apr 2 22:43:36 (none) user.info mc5timed: MEIdentitySrv::process: identity server is now running! IF: eth0
Apr 2 22:43:37 (none) user.info mf4gwlx: makeClientDaemon: 2 with priority: 19
Apr 2 22:43:39 (none) user.info mc5timed: server "192.168.10.200:49980" with stratum 4 found
Apr 2 20:40:53 (none) user.info mc5timed: SM-Timesync: Time set to: 4.02.2020 20:40:53 ip-addr: 192.168.10.200:49980
Apr 2 20:40:53 (none) user.info mc5timed: SM-Timesync: Time set to: 4.02.2020 20:40:53 ip-addr: 192.168.10.200:49980
Apr 2 18:40:54 (none) daemon.info init: starting pid 347, tty '/dev/console': '/etc/init.d/clock_update start'
Apr 2 18:40:54 (none) daemon.info init: starting pid 348, tty '/dev/console': '/sbin/inetd -R 1000 '
Apr 2 18:40:54 (none) daemon.info init: starting pid 350, tty '/dev/console': '/usr/bin/dbus-uuidgen --ensure'
Apr 2 18:40:54 (none) daemon.info init: starting pid 352, tty '/dev/console': '/usr/bin/dbus-daemon --system'
Apr 2 20:40:54 (none) user.info mc5cpclx: makeClientDaemon: 2 with priority: 19
Apr 2 20:40:54 (none) user.debug mc5cpclx: main processID: 357
Apr 2 20:40:54 (none) user.info mc5cpclx: MEPP::setLanguage language filepath: /var/lib/lang/mc5cp_de
Apr 2 20:40:54 (none) user.info mc5cpclx: translator is loaded
Apr 2 20:40:55 (none) user.info mc5cpclx: MEDataBus::MEDataBus append object "MEEmbMatchesObj"
Apr 2 20:40:55 (none) user.info mc5cpclx: MEEmbMatches::MEEmbMatches: 85 matches loaded from /flash/meyton/match_de.mdc
Apr 2 20:40:55 (none) user.info mc5cpclx: CpcGlobalData::setInitValues: read from "/flash/meyton/footnotes.csv" 80 footnotes
Apr 2 20:40:55 (none) user.debug mc5cpclx: CpcGUI::run processID: 357
Apr 2 20:40:55 (none) user.debug mc5cpclx: Mc5EventMan::run processID: 357
Apr 2 20:40:55 (none) user.info mc5cpclx: handyHW1=NoCtrlPanel
Apr 2 20:40:55 (none) user.info mc5cpclx: rangeNoInit=3
Apr 2 20:40:55 (none) user.info mc5cpclx: matchListNoInit=1
Apr 2 20:40:55 (none) user.info mc5cpclx: matchIdInit=110030
Apr 2 20:40:55 (none) user.info mc5cpclx: simulation=0
Apr 2 20:40:55 (none) user.info mc5cpclx: unfailing=0
Apr 2 20:40:55 (none) user.info mc5cpclx: match=0
Apr 2 20:40:55 (none) user.info mc5cpclx: show=0
Apr 2 20:40:55 (none) user.info mc5cpclx: werkstatt=0
Apr 2 20:40:55 (none) user.info mc5cpclx: debug=0
Apr 2 20:40:55 (none) user.info mc5cpclx: noMultiple=0
Apr 2 20:40:55 (none) user.info mc5cpclx: TimeSync=0
Apr 2 20:40:55 (none) user.info mc5cpclx: algol=Algol1999
Apr 2 20:40:55 (none) user.info mc5cpclx: pauseAfterHit=700
Apr 2 20:40:55 (none) user.info mc5cpclx: MeytonMehl=0
Apr 2 20:40:55 (none) user.info mc5cpclx: MMPort=50000
Apr 2 20:40:55 (none) user.info mc5cpclx: roughSelftest=1
Apr 2 20:40:55 (none) user.info mc5cpclx: showHitNo=1
Apr 2 20:40:55 (none) user.info mc5cpclx: Printer="Drucker_192.168.10.240"
Apr 2 20:40:55 (none) user.info mc5cpclx: MEIdentitySrv::process: identity server is now running! IF: eth0
Apr 2 20:40:55 (none) user.info mc5cpclx: Mc5HandyUSB::process processID: 357
Apr 2 20:40:55 (none) user.info mc5cpclx: Mc5Handy::probeUSBHandy: meyton usb panel is attached at /dev/ttyUSB0
Apr 2 20:40:56 (none) user.info mc5cpclx: Mc5HandyUSB::myPanelID: USB
Apr 2 20:40:56 (none) user.info mc5cpclx: Mc5HandyUSB::getUSBKeyCode: Times: T:50:1000:200:50:20
Apr 2 20:40:56 (none) user.info mc5cpclx: Mc5HandyUSB::getUSBKeyCode: Times: T:25:200
25:1000
Apr 2 20:40:56 (none) user.info mc5cpclx: MEEmbMatches::loadListOfMatches: loadMDCfromServer 13 matches loaded from 192.168.10.200:49498
Apr 2 20:40:57 (none) user.warn mc5cpclx: Mc5SMLanIF::sendTACmdTo: time (801546 ms) between two multicast messages to the servers was to long!
Apr 2 20:40:57 (none) user.debug mc5cpclx: CpcScreen::run processID: 357
Apr 2 20:40:57 (none) user.info mc5cpclx: ProgMan::run processID: 357
Apr 2 20:40:57 (none) user.info mc5cpclx: Mf4Frame::initIntern: started the reconnection to the EST
Apr 2 20:40:57 (none) user.info mc5cpclx: Mf4Frame::run processID: 357
Apr 2 20:41:03 (none) daemon.err ntpdate[349]: no server suitable for synchronization found
Apr 2 22:43:59 (none) user.err mc5timed: Time difference are: 1223916.57 ms ip-addr: 192.168.10.200:49980
Apr 2 20:41:13 (none) user.info mc5timed: SM-Timesync: Time set to: 4.02.2020 20:41:13 ip-addr: 192.168.10.200:49980
Apr 2 20:41:18 (none) user.info mf4gwlx: Thread for "/dev/meS1" is running now! Meyton-ET attached
Apr 2 20:41:43 (none) user.info mf4gwlx: Thread for "/dev/meS0" is running now! Meyton-ET attached
Apr 2 20:41:43 (none) user.err mf4gwlx: MEEN::initNetInterface: illegal multicast address: "224.0.0.4"!
Apr 2 20:41:43 (none) user.info mf4gwlx: MEIdentitySrv::process: identity server is now running! IF: eth0
Apr 2 20:41:43 (none) user.info mf4gwlx: Thread GwServer is running now!
Apr 2 20:41:43 (none) user.info mf4gwlx: GwServer::process: pid 317
Apr 2 20:41:51 (none) user.info mf4gwlx: MENWTcpSrv::process: have to client "192.168.10.3:34170" connected! socketC: 16
Apr 2 20:41:59 (none) user.err mc5cpclx: Mf4SI_MENW::clearBuffer: Failure by opening socket: Transport endpoint is not connected
Apr 2 20:43:54 (none) user.info mc5cpclx: Mf4Frame::initIntern: The time for the establishing of the conection to the EST was: 176 sec
Apr 2 20:43:54 (none) user.info mc5cpclx: InitCpc::run: TargetID: 18c9a806
Apr 2 20:43:54 (none) user.debug mc5cpclx: SwitchLights::run processID: 357 Time Sync: 0
Apr 2 20:43:55 (none) user.debug mc5cpclx: Mc5SMLanIF::run processID: 357
Apr 2 20:43:55 (none) user.warn mc5cpclx: Mc5SMLanIF::sendTACmdTo: time (177780 ms) between two multicast messages to the servers was to long!
Apr 2 20:43:55 (none) user.warn mc5cpclx: Mc5SMLanIF::triggerHeartBeat time (182780 ms) between two heart beats is too long!
Apr 2 20:43:55 (none) user.info mc5cpclx: Mc5SMLanIF::_TACmdDataL: 192.168.10.200 offered target data!
Apr 2 20:43:55 (none) user.info mc5cpclx: Mc5SMLanIF::_TACmdDataL: accepted target data from 192.168.10.200!
Viele Grüße
Markus