Seite 1 von 1

Software

Verfasst: Fr 13. Mai 2016, 17:56
von [MEYTON] Forum
  • #29Meyton Support wrote at 30.03.2016 07:59support.meyton.info/
    Dear Ladies and Gentlemen,
    please notice that since Monday the 21st of March 2016 your new forum at forum.meyton.info is open. Please register in our new forum and post there your questions and suggestions.
    This guestbook will be closed at Friday the 15th of April 2016.
    The current guestbook will be available in some way.
    Best regards

    Meyton Support
  • #27Viktor wrote at 02.02.2016 11:51
    Hello.
    I found 64 MB CompactFlash Card inside ControlPC.
    Now I want to buy a new CF card with all required software for MEYTON System. Can you sell it to me and send by post?
    Thanks.
  • #28Meyton Support wrote at 09.02.2016 12:54support.meyton.info/
    Hello Victor.

    Can you tell us which Version off our Software is on your ControlPC.

    Instruction to check your version number:

    Click for nearly 10 seconds on the Start Competition Button, which is the red one in the right corner of you control device.
    You see a blue screen and in the right corner of your screen you see the version number.

    Greetings

    Meyton Support
  • #19David Westley wrote at 04.04.2015 03:29
    How do you alter the time shown on the print out of results to show the correct time?
    Clock time needs altering?
  • #22Roman Geile wrote at 09.06.2015 10:39
    Hello David,

    sorry for the late answer. if you have a Meyton server computer with the ShootMaster II software, the clock of the control PC is automatically synchronized with the server. If you just have a single computer without server, you can only set the time by connecting a usb keyboard and change the system time in the BIOS setup.

    Best regards,
    Roman Geile
  • #17oktay özkan wrote at 23.03.2015 15:33
    ı want to buy black magic electronic target system.5 quantity..Please price list in turkey send to..
  • #18Claudia Schröder wrote at 24.03.2015 09:21
    Dear Oktay Özkan,

    Thank you very much for your inquiry.

    We would be glad to prepare a detailed offer for you. Therefore we require your complete address and a phone number.

    We also need information about the kind of weapons and distances for which you want to use our system.

    We would be very pleased to receive you reply by email to info(email removed)meyton.eu

    Best regards,

    Claudia Schröder
  • #16Viktor wrote at 17.12.2014 20:54
    Hello.
    One more question:
    How can I connect my computer with Windows XP OS and Meyton system?
    I want to have full accessto Meyton system from my computer (to load the shooter's name and surname, to watch the process of shooting etc.) and I want to get all information from Meyton system online in local web.
    Thanks.
  • #21Roman Geile wrote at 09.06.2015 10:36
    Hello Viktor,

    sorry for the late answer. If you have a Meyton server computer with the ShootMaster II software, you can access the result data of the lanes through different interfaces. It is possible to get the results from a MySQL database or by reading in XML files over a samba CIFS network share.

    Best regards,
    Roman Geile
  • #15Viktor wrote at 15.12.2014 14:20
    Hi.
    Recently I got a Meyton system (Compact control PC, Professional + measuring frame 10 m(AR+AP)) which was bought in 2005. There were no updates since 2005.
    How can I download updates and pay for them?
    Are there updates in English?
    Can I connect Meyton system to my computer?
    Thanks.
  • #20Roman Geile wrote at 09.06.2015 10:33
    Hello Viktor,

    sorry for the late answer. You can download updates in the customer area of our homepage. To install the updates you normally need a Meyton Server computer with ShootMaster II software. It is also possible to update a single lane by usb mermory device.

    Best regards,
    Roman Geile
  • #23Viktor wrote at 28.12.2015 17:08
    Hello.
    First question: we didn't buy our Meyton system. It was bought by Ukrainian national shooting team, but they didn't use it. How can I get the customer login and password to update software?
    Second question: there is no usb device in our Meyton system. How can I upload the update witout it and without Meyton Server Computer? I have a single lane.
    Third question: a week ago (approx. 23/12/2015) our Meyton system didn't enable. The information on the screen is: Boot failed.
    How can I fix these 3 problems?
    Thanks, Viktor.
  • #24Viktor wrote at 28.12.2015 17:18
    I sincerely ask you to give me a quick answer. Me and my team really like to work at Meyton system, it is great help for us in our trainings. And now it doesn't work and we are in despair because of this great trouble.
    Thank you for understanding,
    Viktor
  • #25Juergen Mischke wrote at 07.01.2016 09:37
    Hello Victor,
    if you have a single lane it is possible to change the compactflash card. Can you take a look at the controlpc inside. Is there any compactflash visible?
    In most cases it is a 64MB CF card which is removable.
    The error "Boot failed" can be an error on the old compact flash card.
  • #26Viktor wrote at 27.01.2016 10:02
    Hello.
    I found 64 MB CompactFlash Card inside ControlPC.
    Now I want to buy a new CF card with all required software for MEYTON System. Can you sell it to me and send by post?
    Thanks.
  • #13cuypers dirk wrote at 31.10.2014 10:25
    Hello,

    for a competion i ,have put 8 targets in finale mode airrifle en bloked them in match mode
    I have started the sighting and preparation time for 8 minutes
    after the 8 minutes i cant start the first serie 3 schots the target starts again 8 minutes
    where i went wrong
    thank you for the help
  • #14Roman Geile wrote at 31.10.2014 12:31
    Hello Dirk,

    the new ISSF finale consists of multiple phases. Sighting, 3 Shot Series, Single Shots. To switch between this phases you have to press the discipline button. I have send you a manual by email.

    Best regards,
    Roman Geile
  • #9CUYPERS DIRK wrote at 20.08.2014 12:53
    Hello,
    on 19 july the up-date was installed on the range from VSK in Mechelen.
    When i now use my masterlist to make startinglists the information Name and Vorname are reversed. This means if i search Cuypers Dirk in will be listed Name Dirk Vorname Cuypers .
    How can i change this
    Thank You
  • #10Roman Geile wrote at 21.08.2014 10:42
    Hello Dirk,

    do you have an internet connection at your range? Then we could fix the problem in a remote service session. Otherwise I cound write you a manual to fix it.

    Best regards,
    Roman Geile
  • #11CUYPERS DIRK wrote at 23.08.2014 09:26
    thank you for you answer
    please send me a manuel to fix it
    we have internet on the range but having allways problems with the connections
    If we cant fix it we will contact yoy again
    thank you for the help
  • #12Roman Geile wrote at 27.08.2014 12:28
    Hallo Dirk,

    to fix the problem do the following steps:

    1. Start the startlist program in the Meyton Control Center.
    2. Use the function "Start list->Create competitor master data list" to create an actual master data list.
    3. Export this master data list with the function "File->Export start list" and choose the "ASCII" format.
    3. Delete master data list and choose the option to remove shooter from master data.
    4. Import the master data with the function "File->Import start list". In the window choose "Meyton text format (ASCII)" and check the "Expert settings" box. In the expert settings choose "First name, Last name".

    That should do it.

    Best regards,
    Roman Geile
  • #7ANIL VERMA wrote at 16.06.2014 13:14
    i WANT TO PURCHASE BLACK MAGIC MESURING FRAME PLEASE LET ME KNOW THE PRICE OF IT (USE IN 10 MTR RANGE)
    RIFLE SHOOTING
  • #8Claudia Schröder wrote at 17.06.2014 15:41
    Dear Anil Verma,

    Thank you very much for your inquiry.

    We would be glad to prepare a detailed offer for you. Therefore we require your complete address and a phone number.

    We would be very pleased to receive you reply by email to info(email removed)meyton.eu

    Best regards,

    Claudia Schröder
  • #5Jan de Bruin wrote at 11.02.2014 10:44
    WHAT DATABSE DO YOU USE AND IS THE DATABASE OPEN FOR OTHER SOFTWARE ?
  • #6Roman Geile wrote at 11.02.2014 15:18
    Hello Jan,

    actually we use MySQL as database. This database is not open for other software. But you can export the results from the Meyton software into a second MySQL database, which is open for other software (e.g. for programming custom evaluations).

    Best regards,
    Roman Geile
  • #2Nick wrote at 13.04.2013 10:54www.shootingstuff.co.nz
    Hi

    Recently setup new Black Magic target frame - very happy with operation and accuracy. Excellent target frame.

    Just one question, when I select 10M AR Final, it goes to 50M prone final.
    Unable to get the new 10m Air rifle final to run.

    Is there a way to update the matchs?

    Thanks very much.
  • #3Joachim Seibold wrote at 24.04.2013 00:05
    Hi Nick,
    I am pleased you like your MEYTON installation. As far as I know it is the first we installed in NEW ZEALAND.
    You got your installation with one the first versions of the new ISSF program and it seems there have been a mistake.
    I will forward your inquiry to Roman Geile.
    I think he could help you.
    JBest regards
    Joachim Seibold
    Sales Manager
  • #1Maidin wrote at 22.11.2012 18:07
    25 meter machine pc control software
  • #4Joachim Seibold wrote at 24.04.2013 00:07
    Thank you for sending us your full address details for a quotation.
    Best regards
    Joachim Seibold
    Sales Manager