[solved] Cleaning Problems and F8 Numerical Changes

Antworten
sewoongBAE
Beiträge: 18
Registriert: Mi 15. Feb 2017, 01:33
Verein/Verband: ilheung g.s

Cleaning Problems and F8 Numerical Changes

Beitrag von sewoongBAE » Di 18. Jul 2017, 09:55

There was a problem that it was not recognized. F8 levels were up to 6. I cleaned it and rebooted, but F8 showed no change. I did 6 cleaning and confirmed that there is no foreign substance in the laser sensor, but there is no change in the value. What is the solution?

[MEYTON] FAL

Re: Cleaning Problems and F8 Numerical Changes

Beitrag von [MEYTON] FAL » Di 18. Jul 2017, 11:14

Hi sewoongBAE,

what kind of EST? For the MF5R1 and MF4R1 (the small ESTs) you need also to clean the inside of the upper aperture plates. Have a look at the manual "Cleaning the MF5R1 and the MF5R1BM" at http://support.meyton.info -> Manuals

Are the perspex screens undammaged?

Is there a possibility for a remote servicing?

Best regards

Meyton Support

sewoongBAE
Beiträge: 18
Registriert: Mi 15. Feb 2017, 01:33
Verein/Verband: ilheung g.s

Re: Cleaning Problems and F8 Numerical Changes

Beitrag von sewoongBAE » Di 18. Jul 2017, 21:39

The model name we are using is MF5R1. I have tried several cleaning methods in the manual that you have given me. The result is that the value of F8 still does not disappear even after rebooting. This is the first time I am embarrassed. Is remote control possible? Is it a situation we can not solve for ourselves? How does the remote control method work?

[MEYTON] FAL

Re: Cleaning Problems and F8 Numerical Changes

Beitrag von [MEYTON] FAL » Mi 19. Jul 2017, 14:05

Hi,

have a look here.

Then contact us via our contact form.

Best regards

Meyton Support

sewoongBAE
Beiträge: 18
Registriert: Mi 15. Feb 2017, 01:33
Verein/Verband: ilheung g.s

Re: Cleaning Problems and F8 Numerical Changes

Beitrag von sewoongBAE » Do 20. Jul 2017, 03:59

We would like to thank MEYTON staff for their kindly reply.

I will complete my schedule and apply for a remote service.


Our time difference with you is about 8 hours difference.


MEYTON We will make a service request according to working hours.


I am not fully trained and hope to understand many questions.


If opportunity comes, I would like to visit MEYTON company again and get proper training.


It is a skill that can do only the basic installation method and the convention operation. Therefore, we can not handle the error quickly, so we often rely on forum bulletin boards.


I pray that MEYTON will continue to develop in the future. Thank you.

Benutzeravatar
[MEYTON CM] kathe
Beiträge: 519
Registriert: Mo 4. Apr 2016, 21:56
Verein/Verband: SV Rot a.d. Rot

Re: Cleaning Problems and F8 Numerical Changes

Beitrag von [MEYTON CM] kathe » Do 20. Jul 2017, 23:00

Hi sewoongBAE,

the time difference is no problem.
If i calculate correctly the 8 hours difference means Asia region.

From your name i would guess Korea.

We are glad to to help you in the forum in case you have further questions don't hesitate to ask.

And don't worry we will always try to help you to find a solution for your problems.

Best regards
Chris

sewoongBAE
Beiträge: 18
Registriert: Mi 15. Feb 2017, 01:33
Verein/Verband: ilheung g.s

Re: Cleaning Problems and F8 Numerical Changes

Beitrag von sewoongBAE » Mi 24. Jan 2018, 01:37

I finished my busy schedule and did some tests on my own before applying for remote control.

First, change EST IP

Second, the latest software(4.8.0m) updates.

Amazing results.

Measurement frame F8 The numeric value is changed to 0.

We continued testing. Results will work normally.

It is being used until now without any abnormality.

Thank you for always kind answers.

Antworten