Determine number of ASICs! ???

Antworten
sewoongBAE
Beiträge: 18
Registriert: Mi 15. Feb 2017, 01:33
Verein/Verband: ilheung g.s

Determine number of ASICs! ???

Beitrag von sewoongBAE » Mo 26. Jun 2017, 14:05

"Determine number of ASICs!" What are the causes and solutions?

Benutzeravatar
[MEYTON CM] minnten
Beiträge: 426
Registriert: Mo 21. Mär 2016, 13:53
Verein/Verband: Isarthaler Gündlkofen

Re: Determine number of ASICs! ???

Beitrag von [MEYTON CM] minnten » Di 27. Jun 2017, 01:05

Hello,


could you be a little bit more precise?

Where and wehen happened it?

Which Software do you use currently?


Greetings

Minnten

sewoongBAE
Beiträge: 18
Registriert: Mi 15. Feb 2017, 01:33
Verein/Verband: ilheung g.s

Re: Determine number of ASICs! ???

Beitrag von sewoongBAE » Di 27. Jun 2017, 05:56

The same symptom occurred on two installed devices.

One device was solved by replacing the cable.

Another device was solved by replacing cpc.

I want to know the root causes and solutions of these symptoms.

[MEYTON] FAL

Re: Determine number of ASICs! ???

Beitrag von [MEYTON] FAL » Do 29. Jun 2017, 15:15

Hi sewoong,

I think you are telling us that the Control-PC stalls during the boot process while "Determine the number of ASICs". Is that correct?

The ASICs are electronic components on the ESTs. Counting them is a test performed during boot-up of the ESTs. If there are not enough ASICs the ESTs might be defect.

If - like in your case - the number of ASICs is not transferred correctly to the CPC, this might indeed indicate that the number was not transmitted correctly.

Please monitor the ESTs closely as - at this time - it is not certain if the ASICs are really defect (e.g. even a loose contact that reconnected while you were changing the cables) or if the number of ASICs was not transferred correctly over the network.

Please keep us posted!

Best regards

Meyton Support

sewoongBAE
Beiträge: 18
Registriert: Mi 15. Feb 2017, 01:33
Verein/Verband: ilheung g.s

Re: Determine number of ASICs! ???

Beitrag von sewoongBAE » Mo 3. Jul 2017, 06:16

Thank you for your reply. :)


This issue was resolved by replacing the CPC.
If the same symptoms occur, I will ask for A / S.
It seems that I can not solve the problem myself. :cry:




One more question. What does the battery inside the CPC mean?
Is the battery a replacement part at the end of its life?
I also want to know if the CPC is malfunctioning due to battery life.

Benutzeravatar
[MEYTON CM] minnten
Beiträge: 426
Registriert: Mo 21. Mär 2016, 13:53
Verein/Verband: Isarthaler Gündlkofen

Re: Determine number of ASICs! ???

Beitrag von [MEYTON CM] minnten » Mo 3. Jul 2017, 07:07

Hello,

the Battery is for having the right time on your CPC.

So it has the same job like it would have in every other normal PC.

Minnten

Antworten