Verbindungsabbruch Messrahmen - Tablet

Antworten
edelweiss_alex
Beiträge: 28
Registriert: So 9. Okt 2016, 14:58
Verein/Verband: Schützenverein Pretzen

Verbindungsabbruch Messrahmen - Tablet

Beitrag von edelweiss_alex » Sa 18. Mär 2023, 11:17

Hallo,
ich habe sporadisch bei verschiedenen Messrahmen das Problem, dass sie sich für den Benutzer "abschalten", d.h. Licht geht aus und im Shootmaster kommt das Popup "Stand x wurde ausgeschaltet".
Nach kurzer Zeit (1-2 Minuten) kommt der Stand dann aber von selber wieder zurück.

Blöd ist jedoch, dass der in diesem Moment aktive Schütze rausgeworfen wird, was zu Unmut führt.

Im Log des Messrahmens sieht man, dass er abschaltet weil er die Verbindung zum CPC (= Xoro Tablet, kabelgebunden) verliert.
Das kann aber nicht sein, weil komplett kabelgebundene Vernetzung (kein WLAN).

Hat irgendjemand eine Idee was hier schief läuft bzw. wie man es reparieren könnte?

Adressen:
192.168.10.200 -> Zentralrechner
192.168.200.18 -> Tablet
192.168.116.4 -> Messrahmen

Danke und schöne Grüße
Alex

Hier das Log

Code: Alles auswählen

Jul  9 00:00:02 emblinux syslog.info syslogd started: BusyBox v1.2.1
Jul  9 00:00:02 emblinux user.notice kernel: klogd started: BusyBox v1.2.1 (2009.01.13-21:50+0000)
Jul  9 00:00:02 emblinux user.notice kernel: Linux version 2.6.24.7 (ene@dev-server-ene) (gcc version 4.1.2) #1 PREEMPT Wed Sep 24 09:18:48 CEST 2014
Jul  9 00:00:02 emblinux user.warn kernel: CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Jul  9 00:00:02 emblinux user.warn kernel: Machine: SSV Hardware 9263/1
Jul  9 00:00:02 emblinux user.warn kernel: Memory policy: ECC disabled, Data cache writeback
Jul  9 00:00:02 emblinux user.debug kernel: On node 0 totalpages: 8192
Jul  9 00:00:02 emblinux user.debug kernel:   DMA zone: 64 pages used for memmap
Jul  9 00:00:02 emblinux user.debug kernel:   DMA zone: 0 pages reserved
Jul  9 00:00:02 emblinux user.debug kernel:   DMA zone: 8128 pages, LIFO batch:0
Jul  9 00:00:02 emblinux user.debug kernel:   Normal zone: 0 pages used for memmap
Jul  9 00:00:02 emblinux user.debug kernel:   Movable zone: 0 pages used for memmap
Jul  9 00:00:02 emblinux user.warn kernel: Clocks: CPU 192 MHz, master 96 MHz, main 16.000 MHz
Jul  9 00:00:02 emblinux user.warn kernel: CPU0: D VIVT write-back cache
Jul  9 00:00:02 emblinux user.warn kernel: CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Jul  9 00:00:02 emblinux user.warn kernel: CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Jul  9 00:00:02 emblinux user.warn kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Jul  9 00:00:02 emblinux user.notice kernel: Kernel command line: mem=32M console=ttyAT0,115200 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 ro
Jul  9 00:00:02 emblinux user.info kernel: AT91: 160 gpio irqs in 5 banks
Jul  9 00:00:02 emblinux user.warn kernel: PID hash table entries: 128 (order: 7, 512 bytes)
Jul  9 00:00:02 emblinux user.warn kernel: Console: colour dummy device 80x30
Jul  9 00:00:02 emblinux user.info kernel: Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Jul  9 00:00:02 emblinux user.info kernel: Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jul  9 00:00:02 emblinux user.info kernel: Memory: 32MB = 32MB total
Jul  9 00:00:02 emblinux user.notice kernel: Memory: 29384KB available (2712K code, 237K data, 100K init)
Jul  9 00:00:02 emblinux user.debug kernel: Calibrating delay loop... 95.64 BogoMIPS (lpj=478208)
Jul  9 00:00:02 emblinux user.warn kernel: Mount-cache hash table entries: 512
Jul  9 00:00:02 emblinux user.info kernel: CPU: Testing write buffer coherency: ok
Jul  9 00:00:02 emblinux user.info kernel: net_namespace: 64 bytes
Jul  9 00:00:02 emblinux user.info kernel: NET: Registered protocol family 16
Jul  9 00:00:02 emblinux user.notice kernel: SCSI subsystem initialized
Jul  9 00:00:02 emblinux user.info kernel: usbcore: registered new interface driver usbfs
Jul  9 00:00:02 emblinux user.info kernel: usbcore: registered new interface driver hub
Jul  9 00:00:02 emblinux user.info kernel: usbcore: registered new device driver usb
Jul  9 00:00:02 emblinux user.info kernel: NET: Registered protocol family 2
Jul  9 00:00:02 emblinux user.info kernel: Time: pit clocksource has been installed.
Jul  9 00:00:02 emblinux user.info kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jul  9 00:00:02 emblinux user.info kernel: TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Jul  9 00:00:02 emblinux user.info kernel: TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Jul  9 00:00:02 emblinux user.info kernel: TCP: Hash tables configured (established 1024 bind 1024)
Jul  9 00:00:02 emblinux user.info kernel: TCP reno registered
Jul  9 00:00:02 emblinux user.warn kernel: NetWinder Floating Point Emulator V0.97 (double precision)
Jul  9 00:00:02 emblinux user.info kernel: JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
Jul  9 00:00:02 emblinux user.info kernel: io scheduler noop registered
Jul  9 00:00:02 emblinux user.info kernel: io scheduler anticipatory registered (default)
Jul  9 00:00:02 emblinux user.info kernel: atmel_usart.0: ttyAT0 at MMIO 0xfff8c000 (irq = 7) is a ATMEL_SERIAL
Jul  9 00:00:02 emblinux user.info kernel: console [ttyAT0] enabled
Jul  9 00:00:02 emblinux user.info kernel: atmel_usart.3: ttyAT3 at MMIO 0xfeffee00 (irq = 1) is a ATMEL_SERIAL
Jul  9 00:00:02 emblinux user.info kernel: MACB_mii_bus: probed
Jul  9 00:00:02 emblinux user.info kernel: eth0: Atmel MACB at 0xfffbc000 irq 21 (02:80:ad:22:ef:93)
Jul  9 00:00:02 emblinux user.info kernel: eth0: attached PHY driver [Davicom DM9161E] (mii_bus:phy_addr=ffffffff:00, irq=-1)
Jul  9 00:00:02 emblinux user.notice kernel: physmap platform flash device: 02000000 at 10000000
Jul  9 00:00:02 emblinux user.info kernel: physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Jul  9 00:00:02 emblinux user.warn kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Jul  9 00:00:02 emblinux user.warn kernel: physmap-flash.0: CFI does not contain boot bank location. Assuming top.
Jul  9 00:00:02 emblinux user.notice kernel: number of CFI chips: 1
Jul  9 00:00:02 emblinux user.notice kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Jul  9 00:00:02 emblinux user.notice kernel: cmdlinepart partition parsing not available
Jul  9 00:00:02 emblinux user.notice kernel: RedBoot partition parsing not available
Jul  9 00:00:02 emblinux user.notice kernel: Using physmap partition information
Jul  9 00:00:02 emblinux user.notice kernel: Creating 8 MTD partitions on "physmap-flash.0":
Jul  9 00:00:02 emblinux user.notice kernel: 0x00080000-0x00280000 : "kernel"
Jul  9 00:00:02 emblinux user.notice kernel: 0x00280000-0x02000000 : "rootfs"
Jul  9 00:00:02 emblinux user.notice kernel: 0x00280000-0x00a80000 : "rootfs small"
Jul  9 00:00:02 emblinux user.notice kernel: 0x00a80000-0x02000000 : "scrap"
Jul  9 00:00:02 emblinux user.notice kernel: 0x00040000-0x00060000 : "u-boot config"
Jul  9 00:00:02 emblinux user.notice kernel: 0x00060000-0x00080000 : "ssv config"
Jul  9 00:00:02 emblinux user.notice kernel: 0x00000000-0x00020000 : "boot.bin"
Jul  9 00:00:02 emblinux user.notice kernel: 0x00020000-0x00040000 : "u-boot"
Jul  9 00:00:02 emblinux user.debug kernel: ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Jul  9 00:00:02 emblinux user.info kernel: Initializing USB Mass Storage driver...
Jul  9 00:00:02 emblinux user.info kernel: usbcore: registered new interface driver usb-storage
Jul  9 00:00:02 emblinux user.info kernel: USB Mass Storage support registered.
Jul  9 00:00:02 emblinux user.info kernel: mice: PS/2 mouse device common for all mice
Jul  9 00:00:02 emblinux user.err kernel: at91sam9_wdt: Watchdog register already programmed.
Jul  9 00:00:02 emblinux user.info kernel: TCP cubic registered
Jul  9 00:00:02 emblinux user.info kernel: NET: Registered protocol family 1
Jul  9 00:00:02 emblinux user.info kernel: NET: Registered protocol family 17
Jul  9 00:00:02 emblinux daemon.notice modprobe: FATAL: Could not load /lib/modules/2.6.24.7/modules.dep: No such file or directory 
Jul  9 00:00:02 emblinux user.info kernel: RPC: Registered udp transport module.
Jul  9 00:00:02 emblinux user.info kernel: RPC: Registered tcp transport module.
Jul  9 00:00:02 emblinux user.warn kernel: VFS: Mounted root (jffs2 filesystem) readonly.
Jul  9 00:00:02 emblinux user.info kernel: Freeing init memory: 100K
Jul  9 00:00:02 emblinux user.info kernel: eth0: link up (100/Full)
Jul  9 00:00:03 emblinux user.info kernel: Meyton System Functions (MEsys) module 0.2.0a init
Jul  9 00:00:03 emblinux user.info kernel: Meyton Power Management (ME_PMC) module V0.1.0a init
Jul  9 00:00:03 emblinux user.info kernel: PMC hardware address is 0xfffffc00
Jul  9 00:00:03 emblinux user.info kernel: PMC mapped at virtual address 0xc285cc00
Jul  9 00:00:03 emblinux user.info kernel: Meyton Parallel Input/Output (ME_PIO) module V0.2.0a init
Jul  9 00:00:03 emblinux user.info kernel: PIO_A mapped at virtual address 0xc285e200
Jul  9 00:00:03 emblinux user.info kernel: PIO_B mapped at virtual address 0xc2866400
Jul  9 00:00:03 emblinux user.info kernel: PIO_C mapped at virtual address 0xc286e600
Jul  9 00:00:03 emblinux user.info kernel: PIO_D mapped at virtual address 0xc287e800
Jul  9 00:00:03 emblinux user.info kernel: PIO_E mapped at virtual address 0xc2880a00
Jul  9 00:00:03 emblinux user.info kernel: Meyton Pulse Width Modulation (ME_PWM) module V0.1.1a init
Jul  9 00:00:03 emblinux user.info kernel: PWM hardware address is 0xfffb8000
Jul  9 00:00:03 emblinux user.info kernel: PWM virtual address is 0xc2888000
Jul  9 00:00:03 emblinux user.info kernel: Meyton ASIC interface (mf4ax) module V2.1.0d init
Jul  9 00:00:03 emblinux user.info kernel: mf4ax: target changer  n o t  connected!
Jul  9 00:00:03 emblinux user.info kernel: mf4ax: peripheral switched off (Pin-Level 0)
Jul  9 00:00:03 emblinux user.info kernel: mf4ax: EST: 'MF5R1 - 182x182 mm optical electronic target'
Jul  9 00:00:03 emblinux user.info kernel: Meyton Inter-Integrated Circuit (MEi2c) module V0.4.0b init
Jul  9 00:00:03 emblinux user.info kernel: Using PIO Port B for I2C communication
Jul  9 00:00:03 emblinux user.info kernel: PIO_I2C Port virtual address 0xc2866400
Jul  9 00:00:03 emblinux user.info kernel: mf4ax: peripheral switched on (Pin-Level 1)
Jul  9 00:00:03 emblinux user.info kernel: MyROSA correction horizontal: 0  vertical: -3000
Jul  8 22:00:05 emblinux user.info : Cmdline:    --dev /dev/ttyAT0 
Jul  8 22:00:05 emblinux user.info : makeClientDaemon: 2 with priority: 49 
Jul  8 22:00:05 emblinux user.info : Version 0.9.5c started! 
Jul  9 00:00:05 emblinux user.info kernel: mf4ax: SetActiveHoldDelay Hold-Delay: 682 (given value 680) usec
Jul  9 00:00:05 emblinux user.info kernel: mf4ax: target changer  n o t  connected!
Jul  9 00:00:05 emblinux user.info kernel: mf4ax: SetActiveHoldDelay Hold-Delay: 682 (given value 680) usec
Jul  9 00:00:08 emblinux user.info kernel: mf4ax: target changer  n o t  connected!
Jul  9 00:00:08 emblinux user.info kernel: mf4ax: peripheral switched off (Pin-Level 0)
Jul  9 00:00:08 emblinux user.info kernel: fifo_clean count before: 0
Jul  9 00:00:08 emblinux user.info kernel: fifo_clean count after: 0
Jul  9 00:00:08 emblinux user.info kernel: fifo_clean count before: 0
Jul  9 00:00:08 emblinux user.info kernel: fifo_clean count after: 0
Jul  9 00:00:08 emblinux user.info kernel: mf4ax: peripheral switched on (Pin-Level 1)
Jul  9 00:00:08 emblinux user.info kernel: fifo_clean count before: 0
Jul  9 00:00:08 emblinux user.info kernel: fifo_clean count after: 0
Jul  9 00:00:08 emblinux user.info kernel: fifo_clean count before: 0
Jul  9 00:00:08 emblinux user.info kernel: fifo_clean count after: 0
Jul  8 22:00:09 emblinux user.info : is a real time process with highest priority (99) and locked memory! 
Jul  8 22:00:09 emblinux user.info : makeClientDaemon: 1 with priority: 99 
Jul  8 22:00:09 emblinux user.info : Version 1.5.0d started! 
Jul  8 22:00:09 emblinux user.err : MEFileSystem::DeleteFile(): Error deleting file /var/run/TimeSyncOn. No such file or directory 
Jul  8 22:00:09 emblinux user.err : MEFileSystem::DeleteFile(): Error deleting file /var/run/TimeSyncOff. No such file or directory 
Jul  8 22:00:09 emblinux user.err : MEFileSystem::DeleteFile(): Error deleting file /var/run/TimeSyncManual. No such file or directory 
Jul  8 22:00:09 emblinux user.err : MEFileSystem::DeleteFile(): Error deleting file /var/run/TimeSyncServer. No such file or directory 
Jul  8 22:00:09 emblinux user.err : MEFileSystem::DeleteFile(): Error deleting file /var/run/METimeServerIP. No such file or directory 
Jul  8 22:00:09 emblinux user.info : MEIdentitySrv::process: identity server is now running! IF: eth0 
Jul  8 22:00:10 emblinux user.err : MEFileSystem::ReadTextFile(): Error while opening file "/flash/meyton/waitbefore.cfg"! Error: No such file or directory 
Jul  8 22:00:10 emblinux user.err : MEFileSystem::ReadTextFile(): Error while opening file "/etc/SuSE-release"! Error: No such file or directory 
Jul  8 22:00:10 emblinux user.err : MEFileSystem::ReadTextFile(): Error while opening file "/etc/os-release"! Error: No such file or directory 
Jul  8 22:00:11 emblinux user.err : MEFileSystem::ReadTextFile(): Error while opening file "/sys/class/net/eth0/duplex"! Error: No such file or directory 
Jul  8 22:00:11 emblinux user.err : MEFileSystem::ReadTextFile(): Error while opening file "/sys/class/net/eth0/speed"! Error: No such file or directory 
Jul  9 00:00:11 emblinux daemon.notice modprobe: FATAL: Could not load /lib/modules/2.6.24.7/modules.dep: No such file or directory 
Jul  8 22:00:11 emblinux user.err : MEFileSystem::ReadTextFile(): Error while opening file "/sys/class/block/mtdblock/device/model"! Error: No such file or directory 
Jul  8 22:00:11 emblinux user.err : MEFileSystem::ReadTextFile(): Error while opening file "/sys/class/block/mtdblock/device/name"! Error: No such file or directory 
Jul  8 22:00:11 emblinux user.err : MEFileSystem::ReadTextFile(): Error while opening file "/sys/class/block/mtdblock/device/vendor"! Error: No such file or directory 
Jul  8 22:00:11 emblinux user.err : MEFileSystem::ReadTextFile(): Error while opening file "/sys/class/block/mtdblock/device/serial"! Error: No such file or directory 
Jul  8 22:00:11 emblinux user.err : MEFileSystem::ReadTextFile(): Error while opening file "/flash/meyton/start2.sh"! Error: No such file or directory 
Jul  8 22:00:11 emblinux user.err : MEFileSystem::ReadTextFile(): Error while opening file "/var/run/METimeServerIP"! Error: No such file or directory 
Jul  8 22:00:11 emblinux user.err : METimeSync::readTimeServerIpAddr: error reading file "/var/run/METimeServerIP"! 
Jul  8 22:00:12 emblinux user.info : makeClientDaemon: 2 with priority: 49 
Jul  8 22:00:12 emblinux user.info : cpcd V 1.5.7a; (C) Meyton Elektronik GmbH 2017 started 
Jul  8 22:00:12 emblinux user.info : cpcd V1.5.7a; (C) Meyton Elektronik GmbH 2020 started 
Jul  8 22:00:12 emblinux user.info : MatchDIF::MatchDIF: 8 matches loaded from /flash/MEMatches/match_de.mdc 
Jul  8 22:00:12 emblinux user.info : MEIdentitySrv::process: identity server is now running! IF: eth0 
Jul  8 22:00:13 emblinux user.info : makeClientDaemon: 0 with priority: 0 
Jul  8 22:00:13 emblinux user.info : Version 1.0.2a started! 
Jul  8 22:00:13 emblinux user.info : MEIdentitySrv::process: identity server is now running! IF: eth0 
Jul  8 22:00:13 emblinux user.info : makeClientDaemon: 2 with priority: 49 
Jul  8 22:00:13 emblinux user.info : EMAddrListD V 0.0.2a; (C) Meyton Elektronik GmbH 2017 started 
Jul  8 22:00:13 emblinux user.info : EMAddrListD V 0.0.2a; (C) Meyton Elektronik GmbH 2018 started 
Jul  8 22:00:14 emblinux user.info : Main start MEWebSocketServer 
Jul  8 22:00:14 emblinux user.info : Main start WSClientEMAddrList:1075735472 
Jul  8 22:00:14 emblinux user.info : MEIdentitySrv::process: identity server is now running! IF: eth0 
Jul  8 22:00:14 emblinux user.info : MEPT::syslogMEPTStatistics: Total No of Threads started: 13 -  Max. ThreadNo at the same time: 11 -  ThreadNo now: 9 
Jul  8 22:00:14 emblinux user.info : makeClientDaemon: 0 with priority: 0 
Jul  8 22:00:14 emblinux user.info : chkdasd V1.3.1a; (C) Meyton Elektronik GmbH 2019 started 
Jul  8 22:00:15 emblinux user.info : CheckMEDaemons::readPathChkDasList: Monitoring daemon /usr/sbin/sshd 
Jul  8 22:00:15 emblinux user.info : CheckMEDaemons::readPathChkDasList: Monitoring daemon /usr/local/sbin/mf5ifd 
Jul  8 22:00:15 emblinux user.info : CheckMEDaemons::readPathChkDasList: Monitoring daemon /usr/local/sbin/cpcd 
Jul  8 22:00:15 emblinux user.info : CheckMEDaemons::readPathChkDasList: Monitoring daemon /usr/local/sbin/mc5timed 
Jul  8 22:00:15 emblinux user.info : CheckMEDaemons::readPathChkDasList: Monitoring daemon /usr/local/sbin/versionD 
Jul  8 22:00:15 emblinux user.info : CheckMEDaemons::readPathChkDasList: Monitoring daemon /usr/local/sbin/EMAddrListD 
Jul  9 00:00:15 emblinux daemon.err lighttpd[1118]: (log.c.75) server started 
Jul  9 00:00:15 emblinux daemon.info init: no more processes left in this runlevel
Jul  8 22:00:15 emblinux user.err : MatchDIF::loadMDCfromServer: no response received! 
Jul  8 22:00:15 emblinux user.info : MatchDIF::loadListOfMatches: 8 matches loaded from /flash/MEMatches/match_de.mdc 
Jul  8 22:00:23 emblinux user.info : GlobalData::searchNetPrinters: 0 printers found 
Jul  8 22:00:25 emblinux user.info : METranslator::loadTranslationFile: Loaded language file /flash/MELang/ESTA5_de.ts. 103 of 492 texts translated! 
Jul  8 22:00:25 emblinux user.info : ME5Est::ME5Est: EST-Type: 51 PauseAfterHit: 200 NoPreCheck: 1 
Jul  9 00:00:25 emblinux user.info kernel: mf4ax: peripheral switched off (Pin-Level 0)
Jul  9 00:00:25 emblinux user.info kernel: fifo_clean count before: 0
Jul  9 00:00:25 emblinux user.info kernel: fifo_clean count after: 0
Jul  8 22:00:28 emblinux user.info : MENWTcpSrv_::closeSockets: closed socket to CPC and socket for listen 
Jul  8 22:00:28 emblinux user.info : MEIdentitySrv::process: identity server is now running! IF: eth0 
Jul  8 22:00:28 emblinux user.info : MgwServer::process: pid 923 
Jul  8 22:00:29 emblinux user.err : MatchDIF::loadMDCfromServer: no response received! 
Jul  8 22:00:29 emblinux user.info : MatchDIF::loadListOfMatches: 8 matches loaded from /flash/MEMatches/match_de.mdc 
Jul  8 22:00:29 emblinux user.info : Main start MEEmbMatchesObj 
Jul  8 22:00:29 emblinux user.info : Main start GlobalTarget 
Jul  8 22:00:29 emblinux user.info : Main start GlobalData 
Jul  8 22:00:30 emblinux user.info : Main start GlobalLiga 
Jul  8 22:00:30 emblinux user.info : Main start GlobalEval 
Jul  8 22:00:30 emblinux user.info : Main start TargetMan 
Jul  8 22:00:30 emblinux user.info : Main start MgwIF 
Jul  8 22:00:31 emblinux user.info : Main start EventMan 
Jul  8 22:00:31 emblinux user.info : Main start ClusterIF 
Jul  8 22:00:31 emblinux user.info : Main start TransActionIF 
Jul  8 22:00:31 emblinux user.info : Main start DDMenuSystem 
Jul  8 22:00:32 emblinux user.info : Main start AccountMan 
Jul  8 22:00:32 emblinux user.info : Main start MEWebSocketServer 
Jul  8 22:00:32 emblinux user.info : Main start ObjWebSocketTargetData 
Jul  8 22:00:33 emblinux user.info : Main start ObjMBoxManager 
Jul  8 22:00:33 emblinux user.warn : WebSocketMc5TargetData::sendMeTdCmd2ESTA5: can't send command to client! No Connection! 
Jul  8 22:00:34 emblinux user.info : MEPT::syslogMEPTStatistics: Total No of Threads started: 298 -  Max. ThreadNo at the same time: 51 -  ThreadNo now: 12 
Jul  9 00:00:52 emblinux daemon.info upnphd[857]: UPnP Device Handler for eth0 started 
Jul  8 22:01:00 emblinux user.info : MatchDIFThread::process: MatchD Server LAN address is now: 192.168.10.200 
Jul  8 22:02:01 emblinux user.info : server "192.168.10.200:49980" with stratum 4 found 
Mar 17 16:47:01 emblinux user.info : SM-Timesync: Time set to: 3.17.2023 17:47:01 ip-addr: 192.168.10.200:49980 
Mar 17 16:47:02 emblinux user.info : SM-Timesync: Time set to: 3.17.2023 17:47:01 ip-addr: 192.168.10.200:49980 
Mar 17 16:47:02 emblinux user.err : MEFileSystem::DeleteFile(): Error deleting file /var/run/TimeSyncOn. No such file or directory 
Mar 17 16:47:02 emblinux user.err : MEFileSystem::DeleteFile(): Error deleting file /var/run/TimeSyncManual. No such file or directory 
Mar 17 16:47:02 emblinux user.err : MEFileSystem::DeleteFile(): Error deleting file /var/run/TimeSyncServer. No such file or directory 
Mar 17 16:47:14 emblinux user.info : MEWebSocketClient::interpretMEDBBaseEvent: Connection to 192.168.200.18:43312 is running now. 
Mar 17 16:47:14 emblinux user.info : MEWebSocketServer::acceptNewConnection: Connection to 192.168.200.18:43312 is established. AcceptedNo: 1 RefucedNo 0 ActiveNo: 1 
Mar 17 16:47:14 emblinux user.info : WebSocketMc5TargetData::execute_WebClientConnectionStarted: connection from 192.168.200.18 accepted! 
Mar 17 17:47:14 emblinux user.info kernel: mf4ax: target changer  n o t  connected!
Mar 17 16:47:14 emblinux user.info : MENWTcpSrv_::process: client "127.0.0.1:59709" connected to server! socketC: 13 
Mar 17 17:47:15 emblinux user.info kernel: mf4ax: peripheral switched on (Pin-Level 1)
Mar 17 17:47:15 emblinux user.info kernel: fifo_clean count before: 0
Mar 17 17:47:15 emblinux user.info kernel: fifo_clean count after: 0
Mar 17 16:47:15 emblinux user.info : MgwThread::process: connection EST - CPC established! Client: 127.0.0.1:59709 Server: 127.0.0.1:49951 
Mar 17 17:47:15 emblinux user.info kernel: fifo_clean count before: 0
Mar 17 17:47:15 emblinux user.info kernel: fifo_clean count after: 0
Mar 17 16:47:20 emblinux user.warn : TargetLightMethods::setBrightValue: should be value: 128 is value: 128  repeats: 0 
Mar 17 16:47:20 emblinux user.warn : TargetLightMethods::setColorValue: should be value: 64 is value: 64  repeats: 0 
Mar 17 16:47:27 emblinux user.info : MgwIF::connectToEST: EST Type: 51 
Mar 17 16:47:27 emblinux user.info : MgwIF::connectToEST: The connection to the EST required 1 attempts and lasted 12.840 sec! 
Mar 17 16:47:27 emblinux user.info : MgwIF::connectToEST: ESTType: 51 SerialNo: 58524 KernelModulVer: 2.1.0d FWVersion: 0.7.3_MF5C1 EST-IPAddr: 192.168.116.4 
Mar 17 18:05:02 emblinux syslog.info -- MARK --
Mar 17 17:10:47 emblinux user.info : AccountMan::requestWithResponse2AccountD: found server "192.168.10.200:34594" 
Mar 17 17:10:48 emblinux user.warn : TargetMan::interpretMEDBMgwIFEvent: switching time was longer then 20 ms! It is: 30 ms 
Mar 17 17:14:52 emblinux user.warn : TargetMan::interpretMEDBMgwIFEvent: switching time was longer then 20 ms! It is: 21 ms 
Mar 17 18:25:02 emblinux syslog.info -- MARK --
Mar 17 17:33:47 emblinux user.warn : TargetMan::interpretMEDBMgwIFEvent: switching time was longer then 20 ms! It is: 43 ms 
Mar 17 17:39:20 emblinux user.err : MEWebSocketClient::checkPingPongs: The connection terminated because 4 pongs was missing the time since last pong 5230 ms was too long! 
Mar 17 17:39:20 emblinux user.info : MEWebSocketClient::process:53087:1 -  Time: 3126 TextI: 481 (4) TextO: 848095 (371)  BinI: 0 (0) BinO: 0 (0)  PingI: 0 PongI: 3059 PingO: 3063 PongO: 0 
Mar 17 17:39:22 emblinux user.info : WebSocketMc5TargetData::abbruchWarteFunktion: connection from 192.168.200.18 closed! 
Mar 17 17:39:27 emblinux user.warn : MEDataBus::sendToBase: no receive function for "53087:1" defined! 
Mar 17 17:39:40 emblinux user.err : MEDataBus::deleteRecvThreadsWithTimeout: Timeout 20010 ms in object "53087:1"; event was from "53087:1" 
Mar 17 18:39:52 emblinux user.info kernel: mf4ax: peripheral switched off (Pin-Level 0)
Mar 17 18:39:52 emblinux user.info kernel: fifo_clean count before: 0
Mar 17 18:39:52 emblinux user.info kernel: fifo_clean count after: 0
Mar 17 17:39:52 emblinux user.err : MENWTcpBase::closeConnection: close socketC: 13 
Mar 17 17:39:52 emblinux user.info : MgwThread::isRunning: reason why the connection has been closed is: CPC closed the connection  
Mar 17 17:39:52 emblinux user.info : MgwThread::process: connection EST - CPC finished after 3157 sec 
Mar 17 17:40:21 emblinux user.warn : MgwIF::closeConnectionToEST: EST isn't connected!  Connection Status: 0 
Mar 17 17:40:27 emblinux user.info : MEWebSocketClient::interpretMEDBBaseEvent: Connection to 192.168.200.18:43313 is running now. 
Mar 17 17:40:27 emblinux user.info : MEWebSocketServer::acceptNewConnection: Connection to 192.168.200.18:43313 is established. AcceptedNo: 2 RefucedNo 0 ActiveNo: 1 
Mar 17 17:40:28 emblinux user.info : WebSocketMc5TargetData::execute_WebClientConnectionStarted: connection from 192.168.200.18 accepted! 
Mar 17 18:40:28 emblinux user.info kernel: mf4ax: target changer  n o t  connected!
Mar 17 17:40:28 emblinux user.info : MENWTcpSrv_::process: client "127.0.0.1:57636" connected to server! socketC: 13 
Mar 17 18:40:28 emblinux user.info kernel: mf4ax: peripheral switched on (Pin-Level 1)
Mar 17 18:40:28 emblinux user.info kernel: fifo_clean count before: 0
Mar 17 18:40:28 emblinux user.info kernel: fifo_clean count after: 0
Mar 17 17:40:28 emblinux user.info : MgwThread::process: connection EST - CPC established! Client: 127.0.0.1:57636 Server: 127.0.0.1:49951 
Mar 17 18:40:28 emblinux user.info kernel: fifo_clean count before: 0
Mar 17 18:40:28 emblinux user.info kernel: fifo_clean count after: 0
Mar 17 17:40:33 emblinux user.warn : TargetLightMethods::setBrightValue: should be value: 128 is value: 128  repeats: 0 
Mar 17 17:40:33 emblinux user.warn : TargetLightMethods::setColorValue: should be value: 64 is value: 64  repeats: 0 
Mar 17 17:40:41 emblinux user.info : MgwIF::connectToEST: EST Type: 51 
Mar 17 17:40:41 emblinux user.info : MgwIF::connectToEST: The connection to the EST required 1 attempts and lasted 12.830 sec! 
Mar 17 17:40:41 emblinux user.info : MgwIF::connectToEST: ESTType: 51 SerialNo: 58524 KernelModulVer: 2.1.0d FWVersion: 0.7.3_MF5C1 EST-IPAddr: 192.168.116.4 
Mar 17 17:40:41 emblinux user.warn : TransActionIF::sendTAMesg: time (46220 ms) between two multicast messages to the servers was to long! tics: 4295267552

HPWester
Beiträge: 40
Registriert: Fr 17. Feb 2017, 08:37

Re: Verbindungsabbruch Messrahmen - Tablet

Beitrag von HPWester » Mi 22. Mär 2023, 19:48

Das hört sich nach einem Netzwerkproblem an. Am besten den Meyton-Support unter 05226-982425 oder support@meyton.eu kontaktieren.

Thomas811
Beiträge: 2
Registriert: Mo 20. Jun 2022, 10:33
Verein/Verband: D`Speckbachpelzer 1893 Michelfeld e.V.

Re: Verbindungsabbruch Messrahmen - Tablet

Beitrag von Thomas811 » Mi 5. Apr 2023, 18:40

Wir haben am vergangenen Wochenende das gleiche Problem festgestellt.
Sollte es hierzu eine Lösung oder einen Fehlersuchansatz geben, bin ich sehr interessiert.
Bitte auch hier im Forum veröffentlichen.

Danke

edelweiss_alex
Beiträge: 28
Registriert: So 9. Okt 2016, 14:58
Verein/Verband: Schützenverein Pretzen

Re: Verbindungsabbruch Messrahmen - Tablet

Beitrag von edelweiss_alex » Sa 8. Apr 2023, 11:34

Thomas811 hat geschrieben:
Mi 5. Apr 2023, 18:40
Wir haben am vergangenen Wochenende das gleiche Problem festgestellt.
Sollte es hierzu eine Lösung oder einen Fehlersuchansatz geben, bin ich sehr interessiert.
Bitte auch hier im Forum veröffentlichen.

Danke
Hallo Thomas811,

wir haben inzwischen unsere Tablets aktualisiert soweit das überhaupt noch möglich ist (Xoro Megapad 14xx, Android 5.0).
Außerdem haben wir den Browser-Cache von Google Chrome gelöscht.
Seitdem ist das Problem nicht mehr aufgetreten.
Allerdings muss ich zugeben, dass wegen Saisonende der Stand aktuell nicht sehr häufig genutzt wird.

Grüße
Alex

Antworten